Editing Information On The Paper Tab; Editing Information On The Dp2 (Windows Nt) Or Kpis (Macintosh) Tab - Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual

Table of Contents

Advertisement

Attribute
Paper Type
September 2000

Editing Information on the Paper Tab

The Paper tab allows you to specify the paper being calibrated. The value
displayed in the example is the default setting.
Select either KODAK PROFESSIONAL Digital III Paper (Digital III) or
KODAK PROFESSIONAL Digital PT 2976 Paper (2976).
To edit the configuration information on the Paper tab:
1. Change the Paper Type if needed.
2. If you have completed all editing of configuration information (including
information on the other tabbed screens), click OK to save the changes and
close the Edit Configuration screen.
NOTE: Click Cancel to cancel all changes made to the Edit Configuration
screen and close the Edit Configuration screen.
3. To continue making changes to the Edit Configuration, click on another tab
and make changes as needed.
Editing Information on the DP2 (Windows NT) or KPIS
(Macintosh) Tab
The DP2 (or for Macintosh versions, KPIS) tab specifies whether to activate DP2
(or KPIS) interoperability, and if so, names the directory and filename designated
for the DP2 (or KPIS) information.
There are some minor differences in the editing of DP2 and KPIS information;
both are presented. Instructions for editing KPIS information begin on page 29.
Additional Calibration Information
Description
C-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Professional led ii 20r

Table of Contents