Sending Luts - Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual

Additional Calibration Information
Send
LUT icon
C-16

Sending LUTs

The Send LUT to Printer feature allows you to overwrite the current LUT in the
printer. You can create a valid printing LUT using an ASCII text editor. This option
sends the selected LUT to the printer, overwriting any existing LUT.
To send a LUT to the Printer:
1. From the KODAK Device Calibration screen, double-click the device for which
you want to send a LUT.
The LED Calibration Application screen appears.
2. Click the Send LUT icon.
September 2000