Starting The Kodak Device Calibration Software; Adding A Device - Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual

Additional Calibration Information
File menu
C-6

Starting the Kodak Device Calibration Software

Load the Calibration Software according to the table below. (If needed, see
"Installing the Calibration Software" beginning on page C-1.)
MACINTOSH Version
1. Open the folder that
contains the files for the
calibration application.
2. Click on the icon for KODAK
Device Calibration.

Adding a Device

To add a calibration device icon to the KODAK Device Calibration Software:
1. Select New from the File menu on the KODAK Device Calibration window.
WINDOWS NT Version
Select:
Programs/Eastman Kodak/
KPRO Applications/
Kodak Universal Calibration Utility
from the WINDOWS NT Start menu.
September 2000