Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual page 132

Additional Calibration Information
Attribute
Activate DP2
DP2 Location
DP2 Filename
C-28
Editing DP2 Information (WINDOWS NT Systems)
When you click the DP2 tab of the Edit Configuration screen, the following tabbed
screen appears. The values displayed in the example are the default settings.
Indicates if the calibration procedure should generate a LUT file to be
used with the DP2 system
Directory to contain generated LUT files for use with DP2
Name of the file containing the DP2 LUT files
1. If DP2 is not already activated, click the Activate DP2 checkbox (click again
to deactivate) so that the screen looks like the example above.
2. To change the DP2 Location, type a new directory name or click Browse and
select another directory.
3. If needed, change the DP2 Filename.
4. If you have completed all editing of configuration information (including
information on the other tabbed screens), click OK to save the changes and
close the Edit Configuration screen.
NOTE: Click Cancel to cancel all changes made to the Edit Configuration
screen and close the Edit Configuration screen.
5. To make other changes to the Edit Configuration, click on another tab and
make changes as needed.
Description
September 2000