Led Description; Tj1-Ml__ Connection - Omron TJ1-DRT Hardware Reference Manual

Hardware reference
3.5.2

LED Description

/i
Label Status Description
run off Start-up test failed. Unit not operational
Operation stopped. Fatal error
on Start-up test successful. Normal operation
BF off Normal operation
on A fault in the MECHATROLINK-II bus
- Reserved
3.5.3

TJ1-ML__ Connection

The MECHATROLINK-II bus connector (A) fits a MECHATROLINK-
II connector. Use this connector to connect the TJ1-ML__ to a
MECHATROLINK-II network.
The MECHATROLINK-II network must always be closed by the
MECHATROLINK-II terminator.
HARDWARE REFERENCE MANUAL
fig. 30
ML16
RUN
8F
CN1
A
80