Psu Specifications; Psu Box Contents - Omron TJ1-DRT Hardware Reference Manual

Hardware reference
Each Power Supply Unit has one green LED (G). This LED comes on when
you connect the Power Supply Unit to the power source.
Caution
Tighten the screws of the power supply terminal block to the
torque of 1.2 N·m. Loose screws can result in short-circuit, mal-
function or fire.
3.3.3

PSU Specifications

/i
Power Input
Supply voltage
Unit
CJ1W-PA202 110 - 240 VAC
CJ1W-PA205R 110 - 240 VAC
CJ1W-PD025 24 VDC
Caution
The amount of current and power that can be supplied to the sys-
tem is limited by the capacity of the Power Supply Unit. Refer to
this table when designing your system so that the total current
consumption of the units in the system does not exceed the maxi-
mum current for each voltage group.
The total power consumption must not exceed the maximum for
the Power Supply Unit.
HARDWARE REFERENCE MANUAL
Maximum current consumption Output
power
5 V group 24 V group
2.8 A 0.4 A 14 W
5.0 A 0.8 A 25 W
5.0 A 0.8 A 25 W
3.3.4

PSU box contents

• Safety sheet.
• Power Supply Unit.
• Protection label attached to the top surface of the unit.
67