Omron TJ1-DRT Hardware Reference Manual page 86

Hardware reference
LED indicators on the NS115
/i
LED Color Description
Alarm Red Lit: an alarm occurred
Not lit: no alarm active
Ready Green Lit: communication active
Not lit: no communication in progress
Address settings (SW1 & SW2)
The dipswitches (B) on the NS115 configure the communication
settings.
/i
Dipswitch Function Set-
ting
1 Baud rate on
2 Data length on
3 Address off
range
on
4 Maintenance off
(Reserved)
HARDWARE REFERENCE MANUAL
Description
10 Mbps
32-byte data transmission
Addresses 40-4F
Addresses 50-5F
Must always be set to off. on is not used
fig. 35
fig. 36
ON OFF
A
B
C
C
86