Led Description - Omron TJ2-MC64 Hardware Reference Manual

Hardware reference

3.10.2 LED description

The function of the LEDs is defined by the BASIC command
AXIS_DISPLAY. For more information, refer to the Programming Manual.
/i
Axis Label Status AXIS_DISPLAY parameter
0
All run on The TJ2-MC64 recognises the TJ1-FL02
A A EN on Axis enabled.
flashing Axis error
off Axis disabled
A 0 on REG 0
A 1 on REG 1
B B EN on Axis enabled
flashing Axis error
off Axis disabled
B 0 on REG 0
B 1 on REG 1
1. In case of incremental encoder, it reflects the status of the Z-input.
In case of absolute encoder, it reflects the status of the clock output.
HARDWARE REFERENCE MANUAL
1 2 3
AUX OUT 0 Encoder A
1
Encoder Z OUT 1 Encoder B
AUX OUT 0 Encoder A
1
Encoder Z OUT 1 Encoder B
142