Installation And Wiring - Omron 3G3MV-PDRT2 User Manual

Setup and Wiring
3-2

Installation and Wiring

!WARNING Do not touch the conductive parts such as internal PCBs or terminal blocks while
power is being supplied. Doing so may result in electrical shock.
!WARNING Turn ON the input power supply only after mounting the front cover, terminal cov-
ers, bottom cover, Operator, and optional items. Leave them mounted in place
while power is being supplied. Not doing so may result in electrical shock, mal-
function, or damage to the product.
!WARNING Wiring, maintenance, or inspection must be performed by authorized personnel.
Not doing so may result in electrical shock or fire.
!WARNING Wiring, maintenance, or inspection must be performed after turning OFF the
power supply, confirming that the CHARGE indicator (or status indicators) is OFF,
and after waiting for the time specified on the Inverter front cover. Not doing so
may result in electrical shock.
!WARNING
Do not damage, pull on, apply stress to, place heavy objects on, or pinch the
cables. Doing so may result in electrical shock, operation stoppage, or burning.
!WARNING Install devices to stop operation as required to ensure safety. Equipment damage
may result. This is particularly important when operation is set to continue for
communications errors because the Inverter will continue operation.
!WARNING
Do not attempt to disassemble or repair the Unit. Doing either of these may result
in electrical shock, injury, or damage to the product.
!Caution
Do not store, install, or operate the product in the following places. Doing so may
result in electrical shock, fire or damage to the product.
• Locations subject to direct sunlight.
• Locations subject to temperatures or humidity outside the range specified in the specifi-
cations.
• Locations subject to condensation as the result of severe changes in temperature.
• Locations subject to corrosive or flammable gases.
• Locations subject to exposure to combustibles.
• Locations subject to dust (especially iron dust) or salts.
• Locations subject to exposure to water, oil, or chemicals.
• Locations subject to shock or vibration.
!Caution
Do not allow foreign objects to enter inside the product. Doing so may result in fire
or malfunction.
3-6
Chapter 3