Items To Check Before Unpacking; Notice - Omron 3G3MV-PDRT2 User Manual

Thank you for choosing a 3G3MV/3G3RV Series Inverter and DeviceNet Communications
Unit. This manual describes the specifications and operating methods of the DeviceNet Com-
munications Unit used for exchanging data between an Inverter and a Programmable Control-
ler. Specifically, it describes the operation methods, communications methods, and data
setting methods of the 3G3MV-PDRT2 DeviceNet Communications Unit and 3G3RV-PDRT2
DeviceNet Communications Card. Proper use and handling of the product will help ensure
proper product performance, will lengthen product life, and may prevent possible accidents.
Please read this manual thoroughly and handle and operate the product with care.
For details about the 3G3MV Inverter and DeviceNet communications system, refer to the fol-
lowing reference manuals.
Inverter Manuals
DeviceNet Manuals
1.To ensure safe and proper use of the OMRON Inverters, please read this USER'S MANUAL
(Cat. No. I539-E1) to gain sufficient knowledge of the devices, safety information, and precau-
tions before actual use.
2.The products are illustrated without covers and shieldings for closer look in this USER'S MAN-
UAL. For actual use of the products, make sure to use the covers and shieldings as specified.
3.This USER'S MANUAL and other related user's manuals are to be delivered to the actual end
users of the products.
4.Please keep this manual close at hand for future reference.
5.If the product has been left unused for a long time, please inquire at our sales representative.
1.This manual describes the functions of the product and relations with other products. You
should assume that anything not described in this manual is not possible.
2."PLC" in this manual refers to the SYSMAC CS/CJ-series, C200HX/HG/HE, and CV-series
Programmable Controllers that can be connected to a DeviceNet System. (C200HS Program-
mable Controllers support only the remote I/O function.)
3.Although care has been given in documenting the product, please contact your OMRON rep-
resentative if you have any suggestions on improving this manual.
4.The product contains potentially dangerous parts under the cover. Do not attempt to open the
cover under any circumstances. Doing so may result in injury or death and may damage the
product. Never attempt to repair or disassemble the product.
5.We recommend that you add the following precautions to any instruction manuals you prepare
for the system into which the product is being installed.
• Precautions on the dangers of high-voltage equipment.
• Precautions on touching the terminals of the product even after power has been turned
off. (These terminals are live even with the power turned off.)
6.Inverter and Option Unit wiring and Digital Operator operations must be performed by some-
body with a specialist knowledge of electrical systems.
7.The individual life expectancies of the Inverter's internal components must be considered. Per-
form maintenance, such as Unit replacement, appropriate for the operating conditions.
8.Specifications and functions may be changed without notice in order to improve product per-
formance.

Items to Check Before Unpacking

Check the following items before removing the product from the package:
• Has the correct product been delivered (i.e., the correct model number and specifications)?
• Has the product been damaged in shipping?
• Are any screws or bolts loose?
• Have all accessories been delivered together with or attached to the product?

NOTICE