Control I/O Remote I/O + Unit Status - Omron 3G3MV-PDRT2 User Manual

Remote I/O Functions

5-7-2 Control I/O Remote I/O + Unit Status

This remote I/O setting is a default connection path setting, which attaches the 16-bit Unit status data
to the control I/O remote I/O function described in 5-6-1 Control I/O Remote I/O Operation. This sec-
tion explains the I/O format when the unit status is attached to the control I/O remote I/O.
For details on the function of specific input and output bits/bytes, refer to 5-6-1 Control I/O Remote
I/O Operation or 5-7-1 Unit Status.
I/O Format (Allocated Words)
■
● Outputs (PLC to Inverter)
SYSDRIVE 3G3MV
Byte number
Wd n Right- 0
most
Left- 1 Multi-
most function
output 2
Wd n+1 Right- 2 Frequency reference, rightmost byte
most
Left- 3 Frequency reference, leftmost byte
most
Wd n+2 Right- 4
most
Left- 5
most
Wd n+3 Right- 6
most
Left- 7
most
SYSDRIVE 3G3RV/3G3PV/3G3FV
Byte number
Wd n Right- 0 Multi-
most function
input 6
Left- 1 Multi-
most function
output 2
Bit 7 Bit 6 Bit 5
Multi- Multi-
function function
input 7 input 6
Multi- Multi-
function function
output 1 contact
output
Bit 7 Bit 6 Bit 5
Multi- Multi-
function function
input5 input4
Multi- Multi-
function function
output 1 contact
output
Instance ID: 101 Decimal (65 Hex)
Bit 4 Bit 3 Bit 2
Multi- Multi- Multi-
function function function
input 5 input 4 input 3
Bit 4 Bit 3 Bit 2
Multi- Multi- Multi-
function function function
input3 input2 input1
Chapter 5
Bit 1 Bit 0
Reverse/ For-
stop ward/sto
p
Fault External
reset fault
input
Bit 1 Bit 0
Reverse/ For-
stop ward/sto
p
Fault External
reset fault
input
5-33