Omron 3G3MV-PDRT2 User Manual page 195

Configurator Settings
3.Enter the hexadecimal value to be set in the Value field.
4.To write the parameter set values to the Inverter's internal EEPROM (to restore the set values after
a power interruption), select the Write to EEPROM field.
5.Click the Write Button to write the set value to the Inverter.
Note When the Read Button is clicked, the set value of the specified parameter (Instance/Attribute)
is read from the Inverter and displayed as a hexadecimal in the Result field.
■ Parameter Groups and Parameters Not Set in Groups
● 3G3MV
Parameter Groups
Parameter group
All Parameters Function Group 1
Function Group 2
Function Group 3
Function Group 4
Function Group 5
Function Group 6
Parameters that Cannot be Set on the Inverter Parameters Tab Page (Use the
Individual Parameters Tab)
Parameter Class 64
No.
Instance Attribute
n001 01
n064 01
n087 01
n088 01
n101 01
n102 01
n151 01
n152 01
n153 01
n154 01
n155 01
n156 01
n157 01
n158 01
n166 01
n167 01
n168 01
n169 01
01 Parameter write-prohibit selection/parameter initialization
40 Frequency reference loss detection selection
57 Cumulative operation time selection Can be set to 5.5 kW/7.5 kW only
58 Cumulative operation time
65 Speed search deceleration time
66 Speed search level
97 RS-422 communications settings (These parameters are not used for
DeviceNet, so they are not set.)
98
99
9A
9B
9C
9D
9E Motor code (set value differs with capacity)
A6 Open input phase detection level
A7 Open input phase detection time
A8 Open output phase detection level
A9 Open output phase detection time
Details
n002 to n049
n050 to n079
n080 to n119
n120 to n179
ENTER command (Save to EEPROM)
Speed reference, speed monitor, current moni-
tor, output voltage
Details
Can be set to 5.5 kW/7.5 kW only
Chapter 7
7-45