Omron 3G3MV-PDRT2 User Manual page 181

Configurator Settings
Monitoring Methods
■
● Using the Monitor Device Window
• Click the OUT Tab or IN Tab in the Monitor Device Window to monitor in outputs/inputs.
• The following information will be displayed.
Item
No.
I/O Comment
ON/OFF
Maintenance Counter
Clear Value Button
Note 1. The monitoring items in the IN Tab Page are similar to the OUT Tab Page. The numeric val-
ues in the No. field, however, indicate each input terminal. (Refer to page 7-29.)
Note 2. The ON/OFF status of the Connected Component Maintenance Flag can be checked on the
General Tab Page of the Monitor Device Window. When this flag is ON, the Connected Com-
ponent Maintenance check box will be selected.
The settings in the No. field are as follows:
00: Multi-function contact output, 01: Multi-function output 1, 02: Multi-function
output 2
Note: When the present value of the maintenance counter (total ON time or con-
tact operations counter) exceeds the monitor value, the error icon is displayed on
the left side of the corresponding No. setting.
Displays the comment for the connected device for each output terminal.
Displays the ON/OFF status (present value status) for each output terminal.
Displays the present value of the maintenance counter for each output terminal.
Note: The total ON time (s) or contact operations count (No. of times) is dis-
played.
Clears the present value of the maintenance counter to zero.
Note: Select the terminal to be cleared, click the Clear Value Button to clear the
value to zero.
OUT Tab Page in the
Monitor Device
Window
Details
Chapter 7
7-31