Smart Slave Functions; Setting And Changing Device Parameters - Omron 3G3MV-PDRT2 User Manual

Configurator Settings
7-2

Smart Slave Functions

This section describes the details of Smart Slave functions and the operating procedures used in the
Edit Device Parameters Window that is important for setting the Smart Slave functions. The details
on setting and monitoring these functions from the Configurator are also provided here.
7-2-1 Precautions when Operating the Edit Device Parameters
Window
!Caution
To set or change the settings in the Inverter's Edit Device Parameters Window,
first click the Upload Button, and read the present set values for the Inverter. If the
Download Button is clicked without first clicking the Upload Button, the parameter
constants for the Inverter will be overwritten.

Setting and Changing Device Parameters

■
1.Displaying the Edit Device Parameters Window for the Inverter
Display the Edit Device Parameters Window for the Inverter settings that are to be set or changed
using the method shown in 7-1-2 Displaying Windows.
2.Reading the Inverter's Present Set Values
Click the Upload Button to read the Inverter's present set values.
Note If the settings are made without performing this operation, all set values, including the pa-
rameter constants for the Inverter, will be overwritten.
Particularly if the parameter constants have already been set using a Digital Operator or oth-
er device, all the parameter constants will be initialized and set to the default values set in
the Configurator.
Click the Upload Button.
Edit Device
Parameters Window
Chapter 7
7-9