5. Serial Communications Settings
5.2. Cable Wiring Diagram
For details on cable wiring, refer to Section 4 Installation and Wiring in the NX-series
Communications Interface Units User's Manual (Cat. No. W540).
Check the connector shape and signal lines (pin assignment) before you prepare the cable.
Connector Shape and Signal Lines (Pin Assignment)
Applicable connector for serial ports on NX-CIF210: D-sub 9-pin
Applicable connector for V Series RS-232C cable: D-SUB 9-pin (Connector on V Series side:
Female)
Pin No.
Signal name
Pin assignment
11