Configurator Settings
No.
03
Terminal S4 (multi-function
input 4)
04
Terminal S5 (multi-function
input 5)
05
Terminal S6 (multi-function
input 6)
06
Terminal S7 (multi-function
input 7)
07
2.Double-click the field to be set, or select the field to be set and click the Edit Button to display the
setting window.
7-30
3G3MV
Terminal S4 (multi-function
input selection 2)
Terminal S5 (multi-function
input selection 3)
Terminal S6 (multi-function
input selection 4)
Terminal S7 (multi-function
input selection 5)
Double-click the selected field, or click the Edit Button.
Details
3G3RV/3G3PV
IN Tab Page in the Edit Device
Parameters Window
Set the name of the connected device.
(Refer to 7-2-11Connected Device Comment.)
Select either Time or Count as the detection mode.
Set the monitor time (in seconds) if using the
cumulative ON time function.
Chapter 7
3G3FV
Terminal 4 (multi-function con-
tact input 2)
Terminal 5 (multi-function con-
tact input 3)
Terminal 6 (multi-function con-
tact input 4)
Terminal 7 (multi-function con-
tact input 5)
Terminal 8 (multi-function con-
tact input 6)