Sysdrive 3G3Rv/3G3Pv/3G3Fv Inverters - Omron 3G3MV-PDRT2 User Manual

Remote I/O Functions

SYSDRIVE 3G3RV/3G3PV/3G3FV Inverters

Byte number
Wd n Right- 0 Multi-
most function
input 6
Left- 1 Multi-
most function
output 2
Wd n+1 Right- 2 Frequency reference, rightmost byte
most
Left- 3 Frequency reference, leftmost byte
most
Wd n+2 Right- 4 Torque reference/torque limit, rightmost byte
most
Left- 5 Torque reference/torque limit, leftmost byte
most
Wd n+3 Right- 6 Torque compensation bias, rightmost byte
most
Left- 7 Torque compensation bias, leftmost byte
most
● Inputs (Inverter to PLC)
Byte number
Wd m Right- 0 Fault
most
Left- 1 P lock
most comple-
tion (See
note 4.)
Wd m+1 Right- 2 Output frequency monitor, rightmost byte
most
Left- 3 Output frequency monitor, leftmost byte
most
Wd m+2 Right- 4 Torque reference monitor, rightmost byte
most
Left- 5 Torque reference monitor, leftmost byte
most
Wd m+3 Right- 6 Output current monitor, rightmost byte
most
Left- 7 Output current monitor, leftmost byte
most
Note 1. A shaded box indicates that the bit is not used.
Note 2. Control remote I/O inputs and outputs are paired. When using control remote I/O, be sure
to set them together.
Note 3. Control remote I/O objects do not conform to the AC/DC drive profile, but are specially set
for this product.
Note 4. The P lock function (position lock or zero-servo function) is valid only for a 3G3FV Inverter
operating with flux vector control. This bit is not used with other Inverters or control modes.
Bit 7 Bit 6 Bit 5
Multi- Multi-
function function
input5 input4
Multi- Multi-
function function
output 1 contact
output
Bit 7 Bit 6 Bit 5
Alarm Inverter
(minor ready
fault)
Multi-
function
output 2
Bit 4 Bit 3 Bit 2
Multi- Multi- Multi-
function function function
input3 input2 input1
Instance ID: 151 Decimal (97 Hex)
Bit 4 Bit 3 Bit 2
At refer- During During
ence reset reverse
input run
Multi- Multi- Local/re
function function mote
output 1 contact
output
Chapter 5
Bit 1 Bit 0
Reverse/ For-
stop ward/sto
p
Fault External
reset fault
input
Bit 1 Bit 0
Zero During
speed run
Power Opera-
interrup- tion fault
tion
recovery
5-21