Omron 3G3MV-PDRT2 User Manual page 356

Appendices
Note 1. Values in parentheses are for 400-V-class Inverters.
Note 2. When the control mode is changed, the Inverter will revert to default settings. (The open loop
vector control default settings are given above.)
Note 3. The default setting depends upon the type of Inverter. The value for a 200-V-class 0.4-kW
Inverter is given above.
Note 4. The setting range is 10% to 200% of the Inverter's rated output current. The values for a 200-
V-class 0.4-kW Inverter are given above.
Note 5. The setting range is 0.00 to (motor's rated current -0.1 A). The value for a 200-V-class 0.4-
kW Inverter is given above.
Option Parameters
■
Con- Regis- Class 64 (hex)
stant ter num-
In-
ber
stance
(hex)
F1-01 0380 01
F1-02 0381 01
F1-03 0382 01
F1-04 0383 01
F1-05 0384 01
F1-06 0385 01
F1-07 0386 01
F1-08 0387 01
F1-09 0388 01
F1-10 0389 01
F1-11 038A 01
F1-12 038B 01
F1-13 038C 01
F1-14 0397 01
F2-01 038D ---
F3-01 038E ---
F4-01 038F ---
F4-02 0390 ---
F4-03 0391 ---
F4-04 0392 ---
F4-05 03A0 ---
F4-06 03A1 ---
F5-01 0393 ---
F5-02 0394 ---
10-98
Name
At-
tribute
70 Number of PG pulses
71 PG disconnection stopping method
(PGO)
72 PG overspeed stopping method
73 PG speed deviation stopping method
74 PG rotation setting
75 PG output ratio
76 Selecting integral control during accel/
decel.
77 Overspeed (OS) detection level.
78 Overspeed (OS) detection time
79 PG speed deviation detection level
(DEV)
7A PG speed deviation detection time
(DEV)
7B Number of PG gear teeth 1
7C Number of PG gear teeth 2
7D PG disconnection detection time
--- Analog Reference Card selection
--- Digital Reference Card input selection
--- Channel 1 output monitor selection
--- Channel 1 gain
--- Channel 2 output monitor selection
--- Channel 2 gain
--- Channel 1 bias
--- Channel 2 bias
--- Not used.
--- Not used.
Chapter 10
Setting Setting Default
range unit setting
0 to 1 p/r 1000
60000
0 to 3 1 1
0 to 3 1 1
0 to 3 1 3
0, 1 1 0
0 to 132 1 1
0, 1 1 0
0 to 120 1% 115
0.0 to 2.0 0.1 s 0.0 (See
note 1.)
0 to 50 1% 10
0.0 to 0.1 s 0.5
10.0
0 to 1000 1 0
0 to 1000 1 0
0.0 to 0.1 s 2.0
10.0
0, 1 1 0
0 to 7 1 0
1 to 38 1 2
(See
note 2.)
0.00 to 0.01 1.00
2.50
1 to 38 1 3
(See
note 2.)
0.00 to 0.01 0.50
2.50
−10.0 to
0.1% 0.0
10.0
−10.0 to
0.1% 0.0
10.0
--- --- 0
--- --- 1
Write
during
opera-
tion
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
Yes
Yes
Yes
---
---