Ergonomic Hazards - Brooks PreciseFlex DD 6-Axis Service Manual

Direct drive robots
Table of Contents

Advertisement

Brooks Automation
Part Number: 628651 Rev. A
               Electrical Fire Hazard
All energized electrical equipment poses the risk of fire, which may result in severe injury
or death. Fires in wiring, fuse boxes, energized electrical equipment, computers, and
other electrical sources require a Class C extinguisher.
Use a fire extinguisher designed for electrical fires (Class C in the US and Class E
l
in Asia).
It is the facility's responsibility to determine if any other fire extinguishers are
l
needed for the system that the robot is in.
Improper handling of the power source or connecting devices may cause component damage or equipment fire.
Connect the system to an appropriate electrical supply.
l
Turn off the power before servicing the unit.
l
Turn off the power before disconnecting the cables.
l

Ergonomic Hazards

             Heavy Lift Hazard
Failure to take the proper precautions before moving the robot could result in back injury
and muscle strain.
Use a lifting device and cart rated for the weight of the drive or arm.
l
Only persons certified in operating the lifting device should be moving the product.
l
             Tipover Hazard
This product has a high center of gravity which may cause the product to tip over and
cause serious injury.
Always properly restrain the product when moving it.
l
Never operate the robot unless it is rigidly mounted.
l
Copyright © 2024, Brooks Automation
1. Safety
Ergonomic Hazards
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PreciseFlex DD 6-Axis and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Preciseflex dd 4-axis

Table of Contents