Appendix C: Environmental Specifications - Brooks PreciseFlex DD 6-Axis Service Manual

Brooks Automation
Part Number: 628651 Rev. A

Appendix C: Environmental Specifications

The PFDD Robots must be installed in a non-condensing environment with the specifications from
the table below.
General Specification
Indoor use only
Ambient temperature
Storage and shipment temperature
Humidity range
Altitude
Voltage
Mains cord rating, min
Pollution Degree
Approved Cleaning Agents
IP Rating with Tape Seal Option
IP Rating without Tape Seal Option
IK Impact Rating
Copyright © 2024, Brooks Automation
Environmental Specifications
4º C to 40º C
-25º C to +55º C
10 to 90%, non-condensing
Up to 3000 m
100-240 VAC +/- 10%, 50/60 Hz
16AWG, 3 conductor, 10 Amps min
2
IPA, 70% Ethanol/30% water, H2O2 Vapor up to 1000 ppm
52
11
IK08: 5 Joule
Appendix C: Environmental Specifications
Range & Features
Appendices
58