Front Panel - Planet Networking & Communication IGS-6325 Series User Manual

L3 industrial managed ethernet switch
Table of Contents

Advertisement

2.1.2 Front Panel

The front panel provides a simple interface monitoring the Managed Switch.
Switch.
■ Gigabit TP Interface
10/100/1000BASE-T Copper, RJ45 Twisted-pair: Up to 100 meters.
■ SFP Slot
100/1000BASE-X mini-GBIC slot, SFP (Small-form Factor Pluggable) transceiver module: From 550 meters to 2km
(multi-mode fiber) and to 10/20/30/40/50/70/120 kilometers (single-mode fiber).
■ 10 Gigabit SFP+ Slot
10GBASE-SR/LR mini-GBIC slot, SFP+ (Small Factor Pluggable Plus) Transceiver module supports from 300 meters
(multi-mode fiber) to up to 10 kilometers (single mode fiber)
■ AC Power Receptacle
For compatibility with electrical service in most areas of the world, the Managed Switch's power supply automatically
adjusts to line power in the range of 100-240V AC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptacle on the front panel of the Managed Switch and the other end
into an electrical outlet, and then the power will be ready.
The device is a power-required device, which means it will not work till it is powered. If your networks
should be active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime. In some areas, installing a surge
suppression device may also help to protect your Managed Switch from being damaged by unregulated
surge or current to the Switch or the power adapter.
■ DC Power Connector
The front panel of the Managed Switch contains a power switch and a DC power connector, which accepts DC power input
voltage from -36V to -60V DC. Connect the power cable to the Managed Switch at the input terminal block. The size of the
two screws in the terminal block is M3.5.
■ Digital Input
The digital input of the Managed Switch can be activated by the external sensor that senses physical changes. These
changes can include intrusion detection or certain physical change in the monitored area. For example, the external sensor
Figure 2-1 IGS-6325-20T4C4X Switch Front Panel
24
User's Manual of IGS-6325 series
Figure 2-1
shows the front panel of the Managed

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-6325-20s4c4xIgs-6325-20t4c4x

Table of Contents