Table of Contents
Advertisement
4.5.2.4 RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the authentication
configuration page. The RADIUS Authentication/Accounting Server Overview screen in
appears.
Figure 4-5-2-6: RADIUS Authentication/Accounting Server Overview Page Screenshot
The page includes the following fields:
RADIUS Authentication Server Status Overview
Object
#
IP Address
Authentication
Port
Authentication
Status
Accounting
Port
Accounting
Status
Description
The RADIUS server number. Click to navigate to detailed statistics for this server.
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this server.
UDP port number for authentication.
The current status of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS module
is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not reply
within the configured timeout. The server has temporarily been disabled, but will get
re-enabled when the dead-time expires. The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable when more than one server is
enabled.
UDP port number for accounting
The current status of the server. This field takes one of the following values:
Disabled: The server is disabled.
User's Manual of IGS-6325 series
290
Figure 4-5-2-6
Advertisement
Table of Contents
