The page includes the following fields:
Object
Session
Mode
Type
VLAN ID
Figure 4-3-1-7: Mirror Configuration Page Screenshot
Description
Select session id to configure.
To Enabled/Disabled the mirror or Remote Mirroring function
Mirror
The switch is running on mirror mode.
The
source port(s)
Source
The switch is a source node for monitor flow.
The
source
port(s),
RMirror destination
The switch is an end node for monitor flow.
The
destination port(s)
The VLAN ID points out where the monitor packet will copy to. The default VLAN ID is
200.
122
User's Manual of IGS-6325 series
and
destination port
are located on this switch.
reflector port
are located on this switch.
is located on this switch.