Table of Contents
Advertisement
port. An IGMP filter profile can contain one or more, or a range of multicast addresses; but only one profile can be assigned to a
port. When enabled, IGMP join reports received on the port are checked against the filter profile. If a requested multicast group
is permitted, the IGMP join report is forwarded as normal. If a requested multicast group is denied, the IGMP join report is
dropped.
IGMP throttling sets a maximum number of multicast groups that a port can join at the same time. When the maximum number
of groups is reached on a port, the switch can take one of two actions; either "deny" or "replace". If the action is set to deny, any
new IGMP join reports will be dropped. If the action is set to replace, the switch randomly removes an existing group and
replaces it with the new multicast group. The IGMP Snooping Port Group Filtering Configuration screen in
appears.
Figure 4-3-5-9: IGMP Snooping Port Filtering Profile Configuration Page Screenshot
The page includes the following fields:
Object
Port
Filtering Profile
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.3.5.7 IGMP Snooping Status
This page provides IGMP Snooping status. The IGMP Snooping Status screen in
Description
The logical port for the settings.
Select the IPMC Profile as the filtering condition for the specific port. Summary
about the designated profile will be shown by clicking the view button
192
User's Manual of IGS-6325 series
Figure 4-3-5-9
Figure 4-3-5-10
appears.
Advertisement
Table of Contents
