Planet Networking & Communication IGS-6325 Series User Manual page 127

The page includes the following fields:
.Object

Group ID

Port Members
 Mode
 Revertive
 Max Bundle
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-3-2-3: Aggregation Group Configuration Page Screenshot
Description
Indicates the group ID for the settings contained in the same row. Group ID
"Normal" indicates there is no aggregation. Only one group ID is valid per port.
Each switch port is listed for each group ID. Select a radio button to include a port
in an aggregation, or clear the radio button to remove the port from the
aggregation. By default, no ports belong to any aggregation group.
This parameter determines the mode for the aggregation group.

Disabled: The group is disabled.

Static: The group operates in static aggregation mode.

LACP (Active): The group operates in LACP active aggregation mode. See
IEEE 801.AX-2014, section 6.4.1 for details.

LACP (Passive): The group operates in LACP passive aggregation mode.
See IEEE 801.AX-2014, section 6.4.1 for details.
This parameter only applies to LACP-enabled groups. It determines if the group
will perform automatic link (re-)calculation when links with higher priority
becomes available.
This parameter only applies to LACP-enabled groups. It determines the
maximum number of active bundled LACP ports allowed in an aggregation.
User's Manual of IGS-6325 series
127