TCP RST
TCP PSH
TCP ACK
TCP URG
Ethernet Type Parameters
The Ethernet Type parameters can be configured when Frame Type "Ethernet Type" is selected.
Object
EtherType Filter
Ethernet Type Value
Buttons
: Click to apply changes
■
1: TCP frames where the SYN field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Reset the connection" (RST) value for this ACE.
■
0: TCP frames where the RST field is set must not be able to match this
entry.
■
1: TCP frames where the RST field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Push Function" (PSH) value for this ACE.
■
0: TCP frames where the PSH field is set must not be able to match this
entry.
■
1: TCP frames where the PSH field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.
■
0: TCP frames where the ACK field is set must not be able to match this
entry.
■
1: TCP frames where the ACK field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
■
0: TCP frames where the URG field is set must not be able to match this
entry.
■
1: TCP frames where the URG field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Description
Specify the Ethernet type filter for this ACE.
■
Any: No EtherType filter is specified (EtherType filter status is "don't-care").
■
Specific: If you want to filter a specific EtherType filter with this ACE, you
can enter a specific EtherType value. A field for entering a EtherType value
appears.
When "Specific" is selected for the EtherType filter, you can enter a specific
EtherType value.
The allowed range is 0x600 to 0xFFFF but excluding 0x800(IPv4), 0x806(ARP)
and 0x86DD(IPv6). A frame that hits this ACE matches this EtherType value.
329
User's Manual of IGS-6325 series