The page includes the following fields:
Object
Delete
Community Name
Community Secret
Source IP
Source Mask
Buttons
: Click to add a new community entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-2-2-5: SNMPv3 Communities Configuration Page Screenshot
Description
Check to delete the entry. It will be deleted during the next save.
Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is ASCII characters from
33 to 126. The community string will be treated as security name and map a
SNMPv1 or SNMPv2c community string.
Indicates the community secret (access string) to permit access using SNMPv1
and SNMPv2c to the SNMP agent. The allowed string length is 1 to 32, and the
allowed content is ASCII characters from 33 to 126.
Indicates the SNMP access source address. A particular range of source
addresses can be used to restrict source subnet when combined with source
mask.
Indicates the SNMP access source address mask.
User's Manual of IGS-6325 series
89