Max number of VLANs
Buttons
Click to refresh the page. Note that unsaved changes will be lost.
:
:
Click to undo any changes made locally and revert to previously saved values.
4.3.12.2 GVRP Port Configuration
This configuration can be performed either before or after GVRP is configured globally - the protocol operation will be the same.
as well. as screen in
Figure 4-3-12-2
The page includes the following fields:
General Settings
Object
Port
The default is 1000cs
When GVRP is enabled, a maximum number of VLANs supported by GVRP is
specified. By default this number is 20. This number can only be changed when
GVRP is turned off.
appears.
Figure 4-3-11-2: GVRP Port Configuration Page Screenshot
Description
The logical port that is to be configured.
User's Manual of IGS-6325 series
239