Ethernet Ring Protocol Switch - Planet Networking & Communication IGS-6325 Series User Manual

4.6.1.5 Ethernet Ring Protocol Switch

This page allows the user to configure the ERPS by wizard; screen in
The page includes the following fields:
Object
 All Switch Numbers
 Number ID
 Port
 VLAN
Buttons
: Click to configure ERPS.
: Click to save changes.
: Click to show the ring topology.
Figure 4-6-1-5: Ring Wizard page screenshot
Description
Set all the switch numbers for the ring group. The default number is 3 and
maximum number is 30.
The switch where you are requesting ERPS.
Configures the port number for the MEP.
Set the ERPS VLAN.
354
User's Manual of IGS-6325 series
Figure 4-6-1-5 appears.