Table of Contents
Advertisement
2.2 Installing the Industrial Managed Switch
This section describes how to install your Industrial Managed Switch and make connections to the Industrial Managed
Switch. Please read the following topics and perform the procedures in the order being presented. To install your Industrial
Managed Switch on a desktop or shelf, simply complete the following steps.
In this paragraph, we will describe how to install the Industrial Managed Switch and the installation points attended to it.
2.2.1 Desktop Installation
To install the Industrial Managed Switch on desktop or shelf, please follow these steps:
Step 1:
Attach the rubber feet to the recessed areas on the bottom of the Industrial Managed Switch.
Step 2:
Place the Industrial Managed Switch on the desktop or the shelf near an AC power source, as shown in
Step 3:
Keep enough ventilation space between the Industrial Managed Switch and the surrounding objects.
When choosing a location, please keep in mind the environmental restrictions discussed in Chapter 1,
Section 4, and specifications.
Step4:
Connect the Industrial Managed Switch to network devices.
Connect one end of a standard network cable to the 10/100/1000 RJ45 ports on the front of the Industrial Managed
Switch.
Connect the other end of the cable to the network devices such as printer server, workstation or router.
Figure 2-12 Place the Industrial Managed Switch on the Desktop
User's Manual of IGS-6325 series
33
Figure 2-12.
Advertisement
Table of Contents
