Planet Networking & Communication IGS-6325 Series User Manual page 270


Action

Conflict
Buttons
: Select the QCL status from this drop down list.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to release the resources required to add QCL entry, in case the conflict status for any QCL entry is
'yes'.
: Click to refresh the page.
allowed.
■
LLC: Only (LLC) frames are allowed.
■
SNAP: Only (SNAP) frames are allowed.
■
IPv4: The QCE will match only IPV4 frames.
■
IPv6: The QCE will match only IPV6 frames.
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
■
Class: Classified QoS class; if a frame matches the QCE it will be
put in the queue.
■
DPL: Drop Precedence Level; if a frame matches the QCE then DP
level will set to value displayed under DPL column.
■
DSCP: If a frame matches the QCE then DSCP will be classified with
the value displayed under DSCP column.
Displays Conflict status of QCL entries. As H/W resources are shared by multiple
applications. It may happen that resources required to add a QCE may not be
available, in that case it shows conflict status as 'Yes', otherwise it is always 'No'.
Please note that conflict can be resolved by releasing the H/W resources
required to add QCL entry on pressing 'Resolve Conflict' button.
270
User's Manual of IGS-6325 series