Udld; Udld Port Configuration - Planet Networking & Communication IGS-6325 Series User Manual

4.3.11 UDLD

Unidirectional Link Detection (UDLD) is a data link layer protocol from Cisco Systems to monitor the physical configuration of
the cables and detect unidirectional links. UDLD complements the Spanning Tree Protocol which is used to eliminate switching
loops..

4.3.11.1 UDLD Port Configuration

This page allows the user to inspect the current UDLDconfigurations, and possibly change them as well
4-3-11-1 appears.
The page includes the following fields:
General Settings
Object
 Port
 UDLD Mode
Figure 4-3-11-1: UDLD Configuration Page Screenshot
Description
Port number of the switch.
Configures the UDLD mode on a port. Valid values
are Disable, Normal and Aggressive. Default mode is Disable.
Disable: In disabled mode, UDLD functionality doesn't exists on port..
Normal: In normal mode, if the link state of the port was determined to be
unidirectional, it will not affect the port state.
235
User's Manual of IGS-6325 series
.
as screen in Figure