Udld Status - Planet Networking & Communication IGS-6325 Series User Manual


Message Interval
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.3.11.2 UDLD Status

This page displays the UDLD status of the ports as well. as screen in
The page includes the following fields:
UDLD port status
Object
 UDLD Admin State
Aggressive: In aggressive mode, unidirectional detected ports will get
shutdown. To bring back the ports up, need to disable UDLDon that port
Configures the period of time between
in the advertisement phase and are determined to be bidirectional. The range is
from 7 to 90 seconds(Default value is 7 seconds)(Currently default time interval
is supported, due to lack of detailed information in RFC 5171).
Figure 4-3-11-2: UDLD status Page Screenshot
Description
The current port state of the logical port, Enabled if any of
state(Normal,Aggressive) is Enabled.
236
User's Manual of IGS-6325 series
UDLD probe messages on ports that are
Figure 4-3-11-2 appears.