Product Features - Planet Networking & Communication IGS-6325 Series User Manual

L3 industrial managed ethernet switch
Table of Contents

Advertisement

1.4 Product Features

Physical Port
 24-port 10/100/1000BASE-T RJ45 copper
 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24 compatible with 100BASE-FX SFP
 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
 RJ45 to RS232 DB9 console interface for basic management and setup
Hardware Conformance
 One 100 to 240V AC or dual 36 to 60V DC power input, redundant power with polarity reverse protect function
 Active-active redundant power failure protection
 Backup of catastrophic power failure on one supply
 Fault tolerance and resilience
 19-inch rack-mountable design
 IP30 metal case protection
 Supports EFT protection for 6000V DC power and 6000V DC Ethernet ESD protection
 -40 to 75 degrees C operating temperature
Industrial Protocol
Modbus TCP for real-time monitoring in the SCADA system
Digital Input and Digital Output
2 Digital Input (DI)
2 Digital Output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
 Supports maximum 128 static routes and route summarization
 IP dynamic routing protocol supports OSPFv2
 Routing interface provides per VLAN routing mode
Layer 2 Features
 High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
 Storm control support
 Broadcast/Multicast/Unknown unicast
 Supports VLAN
 IEEE 802.1Q tagged VLAN
 Up to 256 VLANs groups, out of 4096 VLAN IDs
 Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
User's Manual of IGS-6325 series
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-6325-20s4c4xIgs-6325-20t4c4x

Table of Contents