Toshiba G9 Installation And Operation Manual page 48

efesotomasyon.com -Toshiba inverter,drive,servo,plc
7 — Communication Option Board
Use this setting if using the optional Communication Board for frequency control.
8 — RX2 Option (AI1)
Used for a -10 to +10-volt DC analog input signal.
9 — Option V/I
Allows for the use of the optional voltage/current frequency-control interface.
10 — UP/DOWN Frequency
A discrete terminal may be configured to increase or decrease the speed of the motor by
momentarily connecting the assigned discrete input terminal to CC. See
further information on this feature.
11 — Pulse Input Option
Used to allow the system to use a pulsed input for frequency control. See
Setting on pg. 122
12 — Pulse Input (motor CPU)
Used to allow the system to use a pulsed input for frequency control. See
Setting on pg. 122
13 — Binary/BCD Input Option
Allows for discrete terminal to be used for frequency-control input.
40
for further information on this feature.
for further information on this feature.
F264 on pg. 128
PG Input Point 1
PG Input Point 1
G9 ASD Installation and Operation Manual
for