Toshiba G9 Installation And Operation Manual page 53

efesotomasyon.com -Toshiba inverter,drive,servo,plc
Past Trip 4 — Past trip information or None.
Note: An improper ASD setup may cause some trips — reset the ASD to the Factory
Default settings before pursuing a systemic malfunction (Program  Utilities 
Type Reset  Reset to Factory Settings).
Direction — Displays the Direction command (forward/reverse).
Discrete Input Terminals — Displays the status (activated = reverse video) of the discrete input
terminals of the Terminal Board.
Discrete Output Terminals — Displays the status (activated = reverse video) of the discrete
output lines of the Terminal Board.
Main Monitor Selections
Two (2) Monitor Mode
on the Frequency Command screen while the ASD is running.
The selected items, along with their real-time values, are displayed on the Frequency Command screen
while running. Not all
The available items are underlined on
Any two of the underlined items may be selected from the listing at Program Utilities  Main
Monitor Selections. Select an item from the Monitor 1 listing and another item from the Monitor 2
listing to be displayed as shown in
G9 ASD Installation and Operation Manual
items may be selected from the Main Monitor Selections screen to be displayed
Monitor Mode items are available for display on the Frequency Command screen.
pg. 43 and pg.
Figure 22. on pg. 31.
44.
45