7. STARTING THE ENGINE
NOTICE
• Make sure the battery switch
is ON before turning ON the
ignition switch or power
switch. If the battery switch is
OFF while attempting to start
the engine, the buzzer will
sound three times.
FUEL PRIMING
ARROW
OUTLET END
(outboard motor
side)
PRIMING BULB
INLET END
(tank side)
Hold the priming bulb so that the
outlet end is higher than the inlet
(so that the arrow on the priming
bulb points up), and squeeze it
until it feels firm, indicating that
fuel has reached the outboard
motor. Check for leaks.
WARNING
Be careful not to spill any fuel.
Spilled fuel vapor may ignite. If
any fuel is spilled, make sure
the area is dry before starting
the engine.
NOTICE
• Do not touch the priming
bulb with the engine running
or when tilting up the
outboard motor. The vapor
separator could overflow.
71