Nmea Interface Coupler; Operating Hour Notification System - HONDA marine BF350A Owner's Manual

NMEA INTERFACE COUPLER

NMEA INTERFACE COUPLER
®
The NMEA2000 interface
coupler connects the outboard
motor to the boat's NMEA2000
network through an interface
cable and transmits information
such as engine information and
warnings to the control panel and
gauges. Contact your dealer for
more information.
OPERATING HOUR
NOTIFICATION SYSTEM
This outboard motor engine
counts the number of operating
hours since the last periodic
maintenance. When the next
periodic maintenance is due, the
engine notifies the NMEA2000
network, and a maintenance
indication is displayed on an
NMEA2000-compatible device.
After periodic maintenance is
performed, reset the hour counter
®
by:
1. Turn ON the power switch or
ignition switch. (The buzzer will
sound twice.)
2. Wait at least 1 second and then
shift to the FORWARD or
REVERSE gear with the remote
control lever of the outboard
motor.
4. CONTROLS AND FEATURES
3. Turn OFF the power switch or
ignition switch.
4. Turn ON the power switch or
ignition switch. (The buzzer will
sound twice.)
5. Insert and remove the
emergency stop switch clip five
times within 20 seconds.
• When reset, the buzzer will
sound once.
6. Set the remote control lever in
the NEUTRAL position.
7. Turn OFF the power switch or
ignition switch.
Periodic maintenance is required
when either the operating hours
or the time since last maintenance
reaches the prescribed limit.
Therefore, periodic maintenance
may be required based on the
number of months since the last
maintenance before the alert
based on engine operating hours
displays (see Maintenance
Schedule on page 113).
47