Lever Switch; (For Multiple Outboard Motors Type) - HONDA marine BF350A Owner's Manual

CAUTION
While in trolling control mode,
check whether the mode
indicator is ON/OFF before
shifting the remote control
lever from the NEUTRAL
position to the FORWARD or
REVERSE position. Operating
the remote control lever while
trolling control mode is ON
creates a risk of collision or
injury due to an unexpected
sudden start, which is caused
by the engine starting to
cruise at the speed set for
trolling control mode, not by
how far the throttle is opened.
• If the engine is not finished
warming up, it cannot go into
trolling mode. So, warm up the
engine (see page 76).
• If remote controls are mounted
at two places, the changing of
trolling control mode can be
done only with the remote
control that is in active mode
(see page 31).
• You can force the release of
trolling control mode by using
the remote control lever to
increase the engine speed to
-1
3,000 min (rpm) or higher.
• To release the trolling control
mode, press and hold the
TROLL/DN switch.
• When the trolling control mode
is released, a short buzz sounds
twice.
4. CONTROLS AND FEATURES
1 LEVER Switch (For multiple
outboard motors type)
Shifting gear and the engine
speed adjustment of all the
outboard motors can be
performed with one remote
control lever when in one-lever
mode.
If you press the 1 LEVER switch on
the remote control in active mode
when all remote control levers are
in the NEUTRAL position, the
mode changes to one-lever mode.
• If remote controls are mounted
at two places, the changing of
one-lever mode can be done
only with the remote control
that is in active mode (see page
31).
• To release one-lever mode,
press and hold the 1 LEVER
switch with the remote control
lever in the NEUTRAL position.
33