Table of Contents
Advertisement
LOCATION
CENTER LINE
Install the outboard motor at the
stern, at the center line of the
boat.
INSTALLATION HEIGHT
0 – 25 mm
(0 – 1 in)
ANTICAVITATION PLATE
BOAT TRANSOM HEIGHT
The anticavitation plate of the
outboard motor should be 0 –
25 mm (0 – 1 in) below the
bottom of the boat.
The correct dimensions differ
according to the type of boat and
the configuration of the bottom of
the boat. Follow the
manufacturer's recommended
installation height.
OUTBOARD MOTOR
INSTALLATION
TRANSOM
HEIGHT
WASHER (12)
NUT (12)
1. Apply the silicone sealant
(Three Bond 1216 or equivalent)
to the outboard motor
mounting holes.
5. INSTALLATION
WASHER (6)
BOLT (6)
STERN BRACKET
51
Advertisement
Table of Contents
