TRIMMING THE OUTBOARD
MOTOR
68°
0°
TILT ANGLE
– 4°
15°
0°
(VERTICAL LINE)
TRIM ANGLE
(when transom angle is 12°)
NOTE:
For multiple outboard motors, the
trim/tilt angle of all outboard
motors is adjusted at the same
time by using the power trim/tilt
switch on the remote control lever
and the trim/tilt angle of each
outboard motor is adjusted by
using each power trim/tilt switch
on the panel.
(D1 type)
12°
Press UP to raise bow.
Press DN to lower bow.
POWER TRIM/TILT SWITCH
(D2 type)
SINGLE TYPE
Press UP to raise bow.
Press DN to lower bow.
POWER TRIM/TILT SWITCH
DUAL TYPE
Press UP to raise bow.
Press DN to lower bow.
REMOTE
CONTROL
LEVER
POWER TRIM/TILT SWITCH
8. OPERATION
REMOTE
CONTROL
LEVER
REMOTE
CONTROL
LEVERS
87