Function Switches (D1 Type); Fast Idle Mode - HONDA marine BF350A Owner's Manual

FUNCTION SWITCHES (D1
type)
[+] SWITCH
[-] SWITCH
Function switches are used for
operations in the fast idle mode
and trolling mode.
NT (WARM)
Lights: The shift is in neutral.
Blinks: It is in the fast idle mode.
ACT
Lights: The shift and throttle
operations are possible.
Off: The shift and throttle
operations are not possible.

Fast Idle Mode

The BF350A model uses
programmed fuel injection, so this
mode will not be needed for
starting.
After the engine starts and if the
outside temperature is below
5°C (41°F), the fast idle mode can
be used to accelerate engine
warm-up.
NEUTRAL
FORWARD
Pull up
REMOTE
CONTROL
LEVER
4. CONTROLS AND FEATURES
Use the [-] switch and the remote
control lever to adjust the engine
speed without gearshift when
warming up the engine.
Keeping the [-] switch pressed
when the remote control lever is
in the NEUTRAL position, turn the
lever forward. Keep turning the
lever forward. The throttle opens
and the engine speed increases
after the lever passes the shift
point.
Note that the gearshift
mechanism does not function
REVERSE
when the [-] switch is pushed once
and then released after the remote
control lever is moved.
The control lever does not operate
NEUTRAL unless the neutral release lever is
RELEASE
pulled.
LEVER
To release the fast idle mode,
press and hold the [-] switch with
the remote control lever in the
NEUTRAL position.
27