Table of Contents
Advertisement
EMERGENCY GEAR SHIFTING
If the gear cannot be shifted, perform shift operation
manually according to the following procedures and
return to port at possible engine speed.
1. Set the remote control lever in the NEUTRAL
position (see page 20-21).
2. Stop the engine (see page 104).
3. Remove the engine cover (see page 58).
4. Insert the Phillips screwdriver with the grip from
the tool kit (see page 112) into the hole of the shift
pivot to move the shaft. Shift gear into neutral by
aligning the neutral mark and projection of the
shift pivot.
Grasp the shaft of the inserted Phillips screwdriver
close to the shift pivot.
Operate in a stable posture that makes it easy to
apply force.
5. Start the engine (see page 71).
6. Shift gear into FORWARD or REVERSE by moving
the shift pivot with the Phillips screwdriver with the
grip from the tool kit.
After returning to port, stop the engine and anchor
the boat.
15. TROUBLESHOOTING
SHIFT PIVOT
NEUTRAL MARK
HOLE
PROJECTION
PHILLIPS
GRIP
SCREWDRIVER
NEUTRAL
REVERSE
FORWARD
NEUTRAL position:
FORWARD position:
REVERSE position:
145
Advertisement
Table of Contents
