Cruise/Up Switch - HONDA marine BF350A Owner's Manual

Hide thumbs Also See for BF350A:
Table of Contents

Advertisement

4. CONTROLS AND FEATURES
• When one-lever mode is
released, a short buzz sounds
twice.
• To use one-lever mode the next
time you are boating, turn the
engine switch or the power
switch off while in one-lever
mode so that the next time you
go boating the one-lever mode
will be on.
34

CRUISE/UP Switch

If you press the CRUISE/UP switch
during cruising with all the remote
control levers in the FORWARD
position, the mode changes to the
cruise control mode, which lets
the boat cruise at a constant
engine speed or velocity.
• Speed can only be adjusted in
cruise control mode when
equipped with GPS.
NOTICE
• Operations may be
inconsistent, depending on
the GPS that you are using.
Consult your dealer for more
information about GPS.
In the cruise control mode,
pressing the CRUISE/UP switch
increases the engine speed or
velocity and pressing the TROLL/
DN switch decreases it.
Engine speed adjusting range:
Engine speed at mode change
-1
±500 min
(rpm) (in steps of 50
-1
min
(rpm))
Velocity adjusting range:
– Velocity at mode change ±10
km/h (in steps of 1.0 km/h)
– Velocity at mode change ±5
miles/h (in steps of 0.5 miles/h)
– Velocity at mode change ±5
knots (in steps of 0.5 knots)
• To select whether to adjust the
engine speed or velocity in the
cruise control mode, use a
multi-function display.
• If remote controls are mounted
at two places, the changing of
cruise control mode can be
done only with the remote
control that is in active mode
(see page 31).

Advertisement

Table of Contents
loading

Table of Contents