STARTING THE ENGINE
Control
Flush-Mount/Top-Mount Types
(DBW type) ............................... P. 63
Side-Mount Type ....................... P. 66
Flush-Mount type
(Mechanical wire type).............. P. 69
Top-Mount Type
(Mechanical wire type).............. P. 71
• Make sure the battery switch is ON
before turning ON the ignition
switch or power switch. If the
battery switch is OFF while
attempting to start the engine, the
buzzer will sound three times.
Flush-Mount/Top-Mount Types
(DBW type)
EMERGENCY
STOP SWITCH
EMERGENCY
EMERGENCY STOP
STOP SWITCH
SWITCH CLIP
LANYARD
OPERATION
1. Put the emergency stop switch clip
in the emergency stop switch, and
attach the emergency stop switch
lanyard securely to the operator or
to the operator's PFD (Personal
Flotation Device).
The engine will not start or run
unless the emergency stop switch
clip is in the emergency stop
switch.
The emergency stop switch clip
and emergency stop switch lanyard
system is a safety device that will
stop the engine if you fall away
from the controls while operating
the boat.
Always attach the emergency stop
switch lanyard securely to the
operator or to the operator's PFD
before starting the engine.
63