Table of Contents
Advertisement
SPARK PLUGS
To ensure proper engine
operation, the spark plugs must
be properly gapped and free of
deposits.
CAUTION
The spark plugs become very
hot during operation and will
remain hot for a while after
stopping the engine. Allow the
engine to cool before
servicing the spark plugs.
See page 120 for instructions on
handling the Iridium spark plugs
(optional parts).
Standard Spark Plug
(Iridium)
Check interval:
Every 200 operating hours or
every year.
Recommended spark plug:
ILZKAR7S11E (NGK)
NOTICE
• Use only the recommended
spark plugs or equivalent.
Spark plugs which have an
improper heat range may
cause engine damage.
Inspection
1. Disconnect the battery negative
(–) terminal.
2. Unlock and remove the engine
cover (see page 58).
12. MAINTENANCE
REAR STRIKER GUIDE COVER
GROMMET
3. Release the grommet of the rear
striker guide cover from the
projections and remove the rear
striker guide cover.
4. Remove the bolt from the
ignition coil. Move the ignition
coil to a position that allows
you to remove the wire
connector easily.
PROJECTION
117
Advertisement
Table of Contents
