Mooring - HONDA marine BF350A Owner's Manual

8. OPERATION
D2 type
SINGLE TYPE
POWER TRIM/TILT SWITCH
DUAL TYPE
POWER TRIM/TILT SWITCH
92
PTT Switch Panel
DUAL TYPE
POWER TRIM/TILT SWITCH
TRIPLE TYPE
POWER TRIM/TILT SWITCH
NOTE:
For multiple outboard motors, the
trim/tilt angle of all outboard
motors is adjusted at the same
time by using the power trim/tilt
switch on the remote control lever
and the trim/tilt angle of each
outboard motor is adjusted by
using each power trim/tilt switch
on the panel.

Mooring

TILT LOCK LEVER (each side)
Tilt up the outboard motor and
use the tilt lock levers when
mooring the boat. Shift the
remote control lever into the
NEUTRAL position and stop the
engine before tilting up the
outboard motor.