Table of Contents
Advertisement
REMOTE CONTROL COVER
NUT
To increase
friction
To decrease
friction
CONTROL LEVER FRICTION
ADJUSTER BOLT
3. Open the remote control cover.
4. Loosen the nut.
5. Adjust the lever friction when
increasing throttle opening and
boat speed by turning the
control lever friction adjuster
bolt right or left.
6. Tighten the nut to lock the lever
friction.
7. Reinstall the remote control
cover.
8. Install and tighten the bolt.
9. Reinstall the maintenance cover.
6. PRE-OPERATION CHECKS
FUEL FILTER WITH WATER
SEPARATOR (LOW PRESSURE
SIDE)
FUEL FILTER with WATER SEPARATOR
(LOW PRESSURE SIDE)
The fuel filter with water separator
is located below the intake
manifold. Check the fuel filter with
water separator for water
accumulation. If water has
accumulated, drain it (see page
124).
To check the water separator, you
need to remove the front striker
guide cover (see page 124).
67
Advertisement
Table of Contents
