Emission Control System - HONDA marine BF350A Owner's Manual

Hide thumbs Also See for BF350A:
Table of Contents

Advertisement

WINDOW
HOLE
SUSPENSION STRAP
10. When installing the
suspension strap to the fuel
filter with water separator,
align the left end of the
suspension strap window hole
with the screw as shown in the
figure.
11. Prime the engine using the
priming bulb (see page 71).
Check for fuel leaks. Repair any
fuel leaks if necessary.
NOTE:
SCREW
If the buzzer sounds, water or
sediment accumulation is found
to be caused by excessive water or
sediment accumulated in the fuel
filter. Inspect the fuel tank and
clean it if necessary.
12. MAINTENANCE

EMISSION CONTROL SYSTEM

The combustion process produces
carbon monoxide and
hydrocarbons. Control of
hydrocarbons is very important
because under certain conditions,
they react to form photochemical
smog when subjected to sunlight.
Carbon monoxide does not react
in the same way, but it is toxic.
Problems that May Affect
Outboard Motor Emissions
If you are aware of any of the
following symptoms, have the
outboard motor inspected and
repaired by your authorized
Honda dealer:
1. Hard starting or stalling after
starting
2. Rough idle
3. Misfiring or backfiring during
acceleration
4. Poor performance (driveability)
and poor fuel economy
127

Advertisement

Table of Contents
loading

Table of Contents