Operating Hour Notification Timing - HONDA marine BF350A Owner's Manual

4. CONTROLS AND FEATURES
Reset the hour counter whenever maintenance is
performed, whether based on the time interval or the
number of operating hours.

Operating hour notification timing

80 hours
20
after reset
hours
Start of Notify Notify
operation
Periodic maintenance display
• Notification about periodic maintenance is
displayed on the multi-function display when the
power switch or the engine switch is turned on.
• The notification for periodic maintenance remains
displayed after the engine is started.
• The display disappears when the remote control
lever is put in the FORWARD or REVERSE position.
48
Every 100 hours
100 hours
after reset
Notify
NMEA2000-compatible display:
• Follow instructions for the display.
• If the display allows selection of notification to be
preset, select "Notify" (or equivalent).
• Turn on the power supply to the display before
turning on the ignition switch of the outboard
motor.
• The indication may differ, depending on the type
of display.
When "Periodic Maintenance" is indicated:
1. Have the periodic maintenance performed without
delay after returning to port.
2. Reset the hour counter.
If not reset, the maintenance indication will remain
in the display, and the hour count until the next
maintenance will be in error.
When the periodic maintenance is conducted before
"Periodic Maintenance" is indicated, reset the hour
counter.
If not reset, the hour count until the next
maintenance will be in error.